Manual

5 Technical Support: 800.283.5936
Below Ceiling
Tile Surface
Above Ceiling
Tile Surface
5. Plug the RJ45 cable into the top end of Mounting Assembly, then lift the ceiling tile back
into place.
6. Make sure the mini-XLR cable is fed through the grommet. Connect the mini-XLR connector
into the receiving plug at the bottom of the Mounting Assembly, then slide the Grommet over
the cable and connector snugging it over the Mounting Assembly against the ceiling tile.
Mini-XLR Connector below
Ceiling Tile Surface
Mini-XLR Plug
Grommet
RJ45 Connector above
Ceiling Tile Surface
RJ45 Plug