User guide

3. Click
DDeevviiccee SSeettuupp
from the buttons on the left. The Device Setup screen appears displaying the general
types of devices you can configure for use with the CHAT 160.
4. From the
SSeelleecctt 11
sstt
column, select the type of device you are connecting to the CHAT 160.
5. In the
SSeelleecctt 22
nndd
column, select the manufacturer of your device. If you are selecting
PPCC aanndd LLaappttoopp
, select
AAllll
. If you are connecting to a VC Breakout Box and your manufacturer is not listed, select
OOtthheerr
.
6. Select the model of the device from the list in the
SSeelleecctt 33
rrdd
column. If you selected
PPCC aanndd LLaappttoopp
, select
AAllll..
If you selected
VVCC BBrreeaakkoouutt BBooxx
and the specific model number is not listed, select Other.
7. Once all three selections have been made, the
AAdddd ttoo MMyy DDeevviicceess
and
AAppppllyy ttoo CCHHAATT
buttons at the bottom
of the screen will become active.
8. When you are satisfied with your selections in all three columns, click the
AAppppllyy ttoo CCHHAATT
button to apply
these settings to the CHAT 160. A message will appear indicating that the settings were successfully applied
to your CHAT 160.
9. Click the
AAdddd ttoo MMyy DDeevviicceess
button and an entry containing these settings will be created in the
MMyy DDeevviicceess
screen allowing you to instantly select and apply this configuration in the future. A message will appear
indicating that the device was successfully added.
10. Repeat steps 1 through 8 for any additional devices you will be using with your CHAT 160.
To ensure optimal sound quality, you need to customize the CHAT 160’s audio settings for every
application and device you will use. Refer to the tuning procedures provided in the
OPTIMIZING
SOUND QUALITY
section that follows.
Chapter 3: Configureing the CHAT 160
1133