User's Manual

MIXER CONSOLE - INTERACT AT
The Mixer Console allows you to create mixes of audio and send them to specific outputs. This
allows you greater flexibility in setting up your conferencing environment. The audio inputs are
shown along the left side of the window and the audio outputs are along the top.
Note: There are several routing paths that are inactive. This is to prevent audio from
being routed back to the source and creating feedback.
Mixer Options
To create a mix of audio
l Select the check boxes for the audio inputs you want routed to each output.
To adjust Input levels
l You can adjust volume on the inputs, using the corresponding volume sliders. Each volume
slider is independent of any other volume control in the mixer. To view a meter the cor-
responding check box must be selected.
To use Output meters
l The meters are peak meters which measure the audio level. The meter bars move from green
to yellow to red as the volume increases. The red bars indicate that the audio is too loud and
is being clipped or cut off.
Mute
l Click any of the Mute buttons to mute an input or output. Each Mute button is independent
of any other Mute control in the mixer.
Click Close to return to the main flow screen.
- 25 -