User's Manual

TELEPHONE SETTINGS - INTERACT AT
You can set user Telephone Preferences as well as Country and Flash settings in the Telephone
Settings window.
Telephone Settings
Preferences
l Select 2 Rings or 4 Rings for the Auto Answer setting, or Disabled if you want to manually
answer calls.
l Select Auto Disconnect if you would like INTERACT to disconnect when it detects loop-drop
or call progression.
l Select Audible Connect if you would like one tone to sound when the INTERACT is taken off
hook and two tones to sound when the INTERACT is on hook.
Configure Ringer
l Select from three available ringer melodies or deactivate the ringer. Click Ringer Test to
hear the selected ringer.
l Adjust ringer volume using the Ringer Level slider.
Program Local Number
l Enter the Local Number for the INTERACT system. This will display on the tabletop controller
LCD.
Configuration
l Select the Country or region where the phone is being used (default is US/Canada)
l Select Flash duration from the Flash Settings list. This setting is dependent on your PBX
system.
Level
l Receive ALC (Auto Level Control) is activated by default. ALC keeps the telephone audio
level consistent with audio levels coming from other sources If de-selected, the following
options will be available:
o
Telco Receive Volume allows you to adjust incoming volume
n TEC:Click to activate Telephone Echo Cancellation. This feature cancels side-
tone from the Headset Receive.
n NLP: Click to activate Non-linear Processing
o
Telco Transmit Volume allows you to adjust outgoing volume (always available)
l Click OKto save your settings.
- 37 -