User's Manual

LOUDSPEAKER SETTINGS - INTERACT AT
You can customize your loudspeaker audio in the Loudspeaker settings window of the INTERACT
Software.
ClearEffect™
Enable ClearEffect
l Click the ClearEffect On/Off button. The indicator will turn green when ClearEffect is ena-
bled. This setting only effects telco receive audio.
Learn about ClearEffect
l When ClearEffect is enabled, it causes the audio coming from the telephone line to emulate
wideband audio. It does this by adding high and low frequencies to the audio signal, cre-
ating a fuller sound. Using this feature is optional.
Equalization
Use Equalizers
l Increase and decrease the Low, Mid and High frequencies using the Equalization sliders.
Levels can be adjusted from +12 dB to – 12 dB.
Learn about Equalization
l Equalization in INTERACT Software is very similar to bass and treble adjustments on a
stereo. Increasing or decreasing the different frequencies allows you to customize loud-
speaker audio and provide the optimal listening experience for your users. Using this feature
is optional.
Mute
Click Mute to silence all output to the loudspeakers.
Meter and Volume
Adjust Volume
l The loudspeaker volume has been optimized for use with the INTERACT system. You can
increase or decrease loudspeaker volume as desired.
Learn about Meters
l The meters are peak meters which show the audio level. The nominal level is -10 dBu. The
meter bars move from green to yellow to red as the volume increases. If the meter shows red,
decrease the volume. Red indicates clipping.
- 38 -