User's Manual
Table Of Contents
- _gen_
- Important Safety Information
- INTERACT Software Overview
- INTERACT MIC EX
- INTERACT Dialers
- INTERACT Com / COM-W (Wireless)
- Network Connection
- Phonebook
- Regional Settings
- Event Log
- System Checks
- Firmware Loader
- INTERACT COM Updater
- Serial Commands
- INTERACT AT
- Basic Connections
- Device Toolbox - INTERACT AT
- Mixer Console - INTERACT AT
- Line Input Settings - INTERACT AT
- Line Output Settings -- Interact AT
- Camera Control
- Dialer - INTERACT AT
- Communications Settings - INTERACT AT
- Record Output Settings -- INTERACT AT
- INTERACT Mic and Mic EX Settings - INTERACT AT Only
- Playback Input Settings - INTERACT AT
- Telephone Settings - INTERACT AT
- Loudspeaker Settings - INTERACT AT
- INTERACT COM Settings - INTERACT AT
- INTERACT PRO
- INTERACT PRO 8i
- Device Toolbox - INTERACT PRO
- Mic Settings - INTERACT PRO
- Mixer Console - INTERACT PRO
- Line Input Settings - INTERACT PRO
- Presets - INTERACT PRO
- Dialer - INTERACT PRO
- Communications Settings - INTERACT PRO
- COM Settings - INTERACT PRO
- Telcos - INTERACT PRO
- Processing Settings - INTERACT PRO
- Output Settings - INTERACT PRO
- Compliance
- Bookmarks
INTERACT SOFTWARE OVERVIEW
ClearOne’s INTERACT Software™ provides an easy interface for configuring system settings and
customizing the audio in your INTERACT conferencing system. While the INTERACT system is
designed to work out of the box for audio conferencing setups, INTERACT Software is required to
adjust audio levels and equalizer settings for the INTERACT components as well as the auxiliary
audio devices.
Installing the INTERACTSoftware
The INTERACTsoftware is available for download at: www.clearone.com - Resources -
Resource Library - under the section titled INTERACT. This section contains the latest software
and firmware releases and documentation for your product.
To install the software:
1. If you are installing from CD on a Windows machine, place the CD in the drive tray and close
the drive. If Autorun is enabled, the installer will launch. If you do not have Autorun enabled
double-click your cd-drive icon from My Computer and navigate to the Software folder.
Open the folder.
2. If you are downloading the software, unzip the downloaded file to a location of your choice.
Open the folder containing the unzipped setup files.
3. From this point, the instructions pertain to both a CDor downloaded install. Double-click
Setup.exe.
4. Once the installation wizard launches, read through the instructions. Click Next.
5. Read the INTERACTEULA, click either "I Do Not Agree" or "I Agree". If you agree, click
Next.
6. Read the Information screen, click Next
7. Select the installation folder, click Next
8. Confirm the installation, click Next
9. The Windows Device Driver Installation Wizard will launch, click Next. This will install the
required drivers for the ClearOne INTERACT product line.
10. When the Device Driver Installation Wizard confirms the status of the drivers, click Finish.
11. Repeat steps 9-10 if asked.
12. The installation is complete. You are ready to use the INTERACTsoftware.
- 7 -