Instruction Manual

Appendix A: Serial Commands 219
DTMFLVL – DTMF Tone Level
This command selects/reports the DTMF tone level.
Command Form: DEVICE DTMFLVL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Value Signed Float 2 -12.00 – 12.00
(Null to query in text)
dB
DTONELVL – Dial Tone Level
This command selects/reports the audible dial tone level.
Command Form: DEVICE DTONELVL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Value Signed Float 2 -12.00 – 12.00
(Null to query in text)
dB
DUPDATE – Download Update
This command reports the status of download updates.
Command Form: DEVICE DUPDATE [Channel Group Status Percent Done Message]
Argument Type Size Values Units
Channel Unsigned Integer 1
Group Unsigned Integer 1
Status Unsigned Integer 1 (Null to query in text)
Percent Done Unsigned Integer
1
Message
Char 60
DVER – Command Dictionary Version
This command reports the version of the command dictionary being used by the unit. This command is read
only.
Command Form: DEVICE DVER [Value]
Argument Type Size Values Units
Value Unsigned Integer 4 (Sent with a Null in text)
ENETADDR – Ethernet Port IP Address
This command selects/reports the IP address of the Ethernet port on the unit.
Command Form: DEVICE ENETADDR [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text)