Instruction Manual

Appendix A: Serial Commands 241
SNMPWRITECOMM – SNMP Write Community String
This command selects/reports the SNMP Write Community String.
Command Form: DEVICE SNMPWRITECOMM [Value]
Argument Type Size Values Units
Value String 30 Write Community validation string (SET data)
(Null to query in text: Default = “private”)
SPEEDDIAL – Speed Dial a Number
This command dials a speed dial number.
Command Form: DEVICE SPEEDDIAL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Value Unsigned Integer 2 1 – 20
(Null to query in text)
STRING – String Execution
This command sends the specified string out the serial port.
Command Form: DEVICE STRING [ID]
Argument Type Size Values Units
ID Unsigned Integer 4 0 – 7
(Null to query last string in text)
SYSCHECKS – System Checks
Initiates the system checks. There is no query for this command.
The System Check integer bits determine which tests are run. Each bit set generates a separate SYSRESULT
response.
COMMAND FORM: DEVICE SYSCHECKS <System Check>
Argument Type Size Values
System
Check
Hexadecimal
Integer
4 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Network
Telephone
Mic 1
Mic 2
Mic 3
Mic 4
Mic 5
Mic 6
Mic 7
Mic 8
All other bits reserved