Specifications

96 Chapter 3: Converge® Console Programming
TELCO TX SETTINGS
Telco Tx Settings enable you to customize telephone transmit channel settings using the Channel View screen.
Accessing Telco Tx Settings
With the Channel View tab selected on the Tab Bar, select the Telco Tx channel on the Tree View tab in the Site
Pane.
As shown above, the Center Pane displays a signal flow diagram for the telco tx channel, real-time peak-level
meters, as well as a channel routing matrix that shows the audio routing configuration for the channel. Configuration
settings for the telco tx channel are displayed as controls (buttons, sliders, etc.) which are located at the appropriate
stage in the signal flow.
The following sections describe how to use these controls to configure telco transmit settings for your installation.
Channel Label
Rename the channel by entering a name in the Label entry field (optional).