Specifications

Technical Services: 800-283-5936 99
To adjust cross-point gain/attenuation, right-click on a cross point box and select Cross Point from the pop-up
menu.
The Cross Point Attenuation slider appears. Move the slider or use the selector box to set the gain/attenuation
level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
NOTE: Your changes are automatically saved when you close the slider.
Channel Routing Matrix: Inputs, Processing, Faders
In the channel routing matrix section, pressing the button above an Input, Process, or Fader cross-point box
displays the signal flow diagram and configuration controls for the channel as shown below.
This display is identical to that shown in Channel View when the channel is selected in the Tree View pane. See
Mic Input Settings, Line Input Settings, Processing Settings, and Fader Settings for more information.