Specifications

Technical Services: 800-283-5936 107
The Cross Point Attenuation slider appears. Move the slider or use the selector box to set the gain/attenuation
level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
NOTE: Your changes are automatically saved when you close the slider.
Expanded Channel Routing Matrix
In the channel routing matrix, pressing the button above or below the cross-point box for a channel displays the
signal flow diagram and configuration controls for that channel as shown below.
This display is identical to that shown in Channel View when the channel is selected in the Tree View pane. See
Line Input Settings, Mic Input Settings, Telco Rx Settings (840T and TH20), Telco Tx Settings (840T and
TH20), and Fader Settings for more information.
You can change the label (name) of the channel in the label entry box. You can also change channel configuration
settings. For example, for an output channel you can toggle the NOM button to turn constant gain mode on or off,
toggle the Mute button, and use the Gain slider to set the gain level for the channel.