Specifications

118 Chapter 3: Converge® Console Programming
input to output. The color of the cross point cell identifies the input type:
Yellow = gated mic input
Blue = non-gated mic input
Brown = pre-AEC
Green = all other inputs
NOTE: The current level (in dB) is shown in cross point cells.
Black cell are restricted routing paths which prevent Telco, E-Bus, Processing, and Fader channels from being
routed back to themselves.
Clear Matrix Button
Press the Clear Matrix button to clear ALL current matrix settings and restore the default matrix configuration. A
Confirm dialog appears asking you to confirm the clear matrix operation.
Audio Routing Matrix
The numbers and letters along the top and left side of the matrix show the cross point coordinates. The Labels for
each channel are also shown to make them easy to identify. As you move the cursor over the matrix, the labels for
the channels are highlighted in white for each cross point.
NOTE: Clicking on a channel label opens the Channel View screen for that channel, allowing you
to modify the channel label and change channel configuration settings as needed.
Input Routing
To route an input to an output, click in the routing matrix at the intersection between the input and the output. A mic
input can be designated as gated (yellow) or non-gated (blue) by clicking repeatedly in the cross point. All other
input cross points will be colored green.
Expansion Bus O–Z Routing
Audio on any Converge Pro unit in the E-bus network can be placed on the bus or taken off the bus and routed to
•
•
•
•