Specifications

Technical Services: 800-283-5936 119
any destination within the unit.
The Converge Pro 840T has 12 digital mix-minus buses:
O–R buses are defaulted as the mic mix buses and can communicate the NOM count. Gated mics are
routed to the O-bus by default.
S–Z buses are defaulted as the auxiliary mix buses. They are used to carry auxiliary audio such as that from
codecs and Converge Pro TH20s. These buses are used as mic-mix buses when NOM count is not required.
Process A–D Routing for 840T (Process A–G for 880 and 8I)
There are four processing blocks on the Converge Pro 840T (Processing A–D). With these processing channels,
you can apply Filters, equalizers, and other Processing settings to an input or a group of inputs which can then be
routed to a single output or group of outputs.
Cross Point Shortcut Menu
In addition to setting levels, the Cross Point Shortcut Menu (shown below) enables you to copy and paste the
configuration of the current cross point to other cross points. To access the shortcut menu, right-click anywhere in
the Center Pane of the Matrix screen.
Cross Point Level Control
To adjust the level for a cross-point, right-click on the cross point and select Cross Point from the shortcut menu.
The Cross Point Attenuation slider appears. Move the slider or use the selector box to set the gain/attenuation
level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
NOTE: Your changes are automatically saved when you close the slider.
The level you select now appears numerically in the cross point box within the matrix.
Copy and Paste Cells
You can copy a single cell or the entire matrix using the shortcut menu options.
•
•