Specifications

120 Chapter 3: Converge® Console Programming
To copy a cross point to multiple cross points, press <Ctrl+C> to copy, then press <Ctrl+V> while holding down
the left-mouse button and dragging the mouse over the cross points to which you want to copy the settings.
Copy and Paste Matrix
To copy the entire matrix, use the shortcut menu commands or press <Ctrl+G> to copy the matrix, select the unit
you want to copy the matrix to in the Site View Tab, and press <Ctrl+P> to paste the matrix into the matrix screen
for the selected unit.
Clear Matrix
Press the Clear Matrix button to clear ALL current matrix settings and restore the default matrix configuration. A
Confirm dialog appears asking you to confirm the operation.
Exporting Matrix Objects
Matrix objects allow you to save customized matrix configurations into the Database and reuse them. This enables
you to instantly re-configure the entire matrix to accommodate changes in conferencing or venue configuration
requirements, and to rapidly configure additional Converge Pro units using Drag and Drop Configuration.
To capture the current matrix configuration and save it as a matrix object, right click anywhere in the center pane of
the matrix screen and select Export as object from the pop-up menu.
To apply a matrix object, drag it from the Objects Pane and drop it onto the matrix in the Matrix Tab screen.
For more information on using AV devices and objects, refer to the Table of Contents for these related topics:
Controls and Connections
Channel View Tab Overview
Expansion Bus Overview
NOM
Gating
Filters
Processing
Database Tab
Drag & Drop Configuration
Line Input Settings
Mic Input Settings
Telco Rx Settings (840T and TH20)
Output Settings
Telco Tx Settings (840T and TH20)
Fader Settings
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•