Specifications

Technical Services: 800-283-5936 9
OPERATING REQUIREMENTS
Power
Converge Pro devices automatically accommodate voltages of 100–240 VAC, 50/60 Hz, 15 W.
Telephone
Converge Pro devices operate on a standard analog telephone line and connect to the telephone system with a
standard RJ-11 modular jack. If you do not have an RJ-11 jack where you want to install your Converge Pro, call
your local telephone company for installation. Converge Pro 840T and TH20 can be configured to meet compliance
requirements of different countries via the Console software.
Equipment Placement
Converge Pro devices are designed for installation in a standard 19-inch equipment rack.
Environmental
Converge Pro devices are designed to operate at ambient unit temperatures between 14° F (-10° C) and 122° F (50°
C).
SYSTEM REQUIREMENTS
The Converge Pro Console software minimum system requirements are:
Supported Operating Systems
Windows XP
Windows 2000
Minimum System Requirements
Processor: 300 Mhz Pentium III (or AMD equivalent)
RAM: 256 Megabytes RAM
Video: 1024x768 SVGA (16 bit)
Hard Drive: 40 Megabytes
Network: 10/100 Mbps Ethernet
USB Port: Version 1.0
CD Drive: CD/DVD ROM
Minimum Software Requirements
Browser: Microsoft Internet Explorer 4.0 or higher
Adobe Flash: Version 9.0 or higher
•
•
•
•
•
•
•
•
•
•
•
WARNING: The country code must be set correctly in Console to ensure that the unit operates properly
when connected to the telco network, and that it complies with the country’s telco requirements.
Changing this code to a country other than the intended country of operation might cause Converge Pro
devices to be non-compliant.