Specifications

128 Chapter 3: Converge® Console Programming
GATING TAB
The Gating Tab of the Console main screen allows you to create Gating Groups and assign Mic Inputs to them
for greater flexibility and control.
Gating group assignments combine individual channel Gating configurations created using the Channel
Properties Configuration screen. When inputs are assigned to a gating group, the gating information from the
assigned inputs is used to control how the entire mixer behaves.
The Converge Pro product family (excluding the TH20) feature four internal gating groups (Internal 1–4) and four
global gating groups across the expansion bus (Global A–D). Mic inputs are routed to Global Group A by default.
If an input is not assigned to a gating group, that mic’s gating properties are independent, and they have no effect
on any gating group. When gating groups span two or more units (global gating groups), the settings must be the
same for each unit attached to the global gating group.
NOTE: Mic inputs can be assigned to one and only one Gating Group at a time.
Accessing Gating Groups
To access gating groups, click the Gating Tab on the Tab Bar in Console.
Gating configurations are shown in the Center Pane. The following sections describe how to configure gating
groups.
Gating Controllers