Specifications

156 Chapter 3: Converge® Console Programming
5. Set the output channel cross-points that you want to include in the preset using the matrix.
6. Configure the desired setting changes for the preset including:
Mic Input, Line Input, Output, Telco Rx, Telco Tx, Processing, and Fader channel settings
Gating settings
Control settings
AEC Reference settings
7. Click on the Preset Mask Control/Status B boxes to set the pin states (H = High, L = Low) required to trigger
preset execution (optional). See Preset Control Masking for more information.
8. Press the Macro Selection button to execute one or more macros when the preset executes (optional).
NOTE: In most cases, macros should not be used in a preset, unless the desired functionality
requires using a serial command. Some examples that require using a macro include:
querying device GPIO status when a preset executes; turning Safety Mute on when a
preset executes; and sending a Command String to an external control device to indicate
preset/room configuration status. For more information on serial commands, see the
Converge Pro Installation and Operation Manual.
9. Press the Save button to save the preset
10. Click the Exit button to exit preset mode and return to configuration mode.
The preset is now available for execution as described below.
•
•
•
•