Specifications

Technical Services: 800-283-5936 207
Command Form: DEVICE AMXDUET [Value]
Argument Details
Name Type Size Values Units
Value Unsigned Integer 4 0 = Off
1 = On
2 = toggle
(Null to query in text)
Error
Number
Text Message Explanation / Possible Solution
1 Memory error. The box is out of internal memory. Power cycle the box.
2 No command found. A command was not found in the string.
3 Argument count error. The binary argument count is wrong for the command or the
command is not supported in text due to variable argument
count.
4 Not implemented. The command is not implemented.
5 Argument error. The command had an argument that was out of range.
6 Unknown command. The command is not known to the box.
7 Bad Checksum. The binary command’s checksum was wrong.
8 Preset or Macro Invalid. A preset or macro failed to program because it was too large
or because its command list contained an invalid command.
9 Password Error. The command cannot be executed at the current user level.
Login with a higher access username and password before
the command can be performed.
10 Unit is Busy. The command cannot be executed because the unit is
busy performing a previously received command (Such as
PUTGET or SYSCHECKS).
AUDIOMASTER – EXPANSION BUS AUDIO MASTER MODE
This command reports the mode of the unit for control of the expansion bus audio.
Command Form: DEVICE AUDIOMASTER [Value]
Argument Details
Name Type Size Values Units
Value Unsigned Integer 4 1 = Master
2 = Slave
(Null to query in text)
BAUD - BAUD RATE
This command selects/reports the baud rate of the serial port.
Command Form: DEVICE BAUD [Value]
Argument Details
Name Type Size Values Units
Value Unsigned Integer 4 9600, 19200, 38400, 57600, 115200
(Null to query in text)
BOOTERR – BOOT ERROR REPORT
This command reports the last noon-DSP related boot error number. This command is read only.
Command Form: DEVICE BOOTERR [Value]
Argument Details
Name Type Size Values Units
Value Singed Integer 1 Error Number
(Null to query in text)