Specifications

238 Appendix A: Serial Commands
TELNETPORT - TELNET PORT
This command selects/reports the port for telnet connections.
Command Form: DEVICE TELNETPORT [Value]
Argument Details
Name Type Size Values Units
Value Unsigned Integer 4 (Null to Query in Text)
TEP – TIMED EVENT PROGRAMMING
This command programs one of the timed events. There is no query for this command.
Command Form: not text supported
Argument Details
Name Type Size Values
Event Unsigned Integer 4 0 – 9
Start Time time_t 4
End Time time_t 4 0 if using EndOccur or no End
End
Occurrence
Unsigned integer 4 1 – 100
0 if using EndTime or no End
Reoccurrence
Week
Unsigned integer 1 0 – 12
Reoccurrence
Day
Unsigned integer 1 0 – 31
Reoccurrence
Hour
Unsigned integer 1 0 – 23
Reoccurrence
Minutes
Unsigned integer 1 0 – 59
Event 16 Any defined binary command with 1
argument
TIMELOCALE – TIME LOCALE SETTINGS
This command sets or reports the time locale settings.
Command Form: DEVICE TIMELOCALE [DaylightSavings TimeZone TimeZoneName]
Argument Details
Name Type Size Values Units
Daylight Savings Unsigned Integer 4 0 = Do not use Daylight
Savings
1 = Use Daylight Savings
(NULL to Query in Text)
Time Zone Unsigned Integer 4 The number of seconds
from UDT. (-86400 – 86400)
Time Zone Name String 32 Description of time zone
TOUT - TIME OUT SELECT
This command selects/reports the inactivity time out before returning to the unit title screen on the front panel.
Command Form: DEVICE TOUT [Value]
Argument Details
Name Type Size Values Units
Value Unsigned Integer 4 0 = No Time Out
1 – 15
(Null to query in text)
Min
UCLOCK – CLOCK SET BY UDT COORDINATES
This command sets or reports the current time.
Command Form: DEVICE UCLOCK [UDT time]