Specifications

Technical Services: 800-283-5936 21

Use the Menu Dial to highlight the desired value. Press the Select button to select it.

The Change DID Menu prompt appears. Choose Yes to set the selected DID value, or No to return to the

Device ID menu.

CHANGING DID MENU

Change DID to

Yes

Press Esc until to return to the Settings menu.

Repeat this process for each Converge Pro device on the E-bus network.

NOTE: You can also set Device IDs in the Unit Properties screen in Console.

LCD PROGRAMMING OVERVIEW

LCD Programming allows you to make simple configuration adjustments to your Converge Pro unit using easy and

intuitive front panel controls (shown below).

USB Type B Port: Provides convenient front panel connectivity for laptops, computers, and other USB

devices.

Microphone-On LEDs: These LEDs indicate microphone gate status.

LCD Display: The LCD display shows model number, unit name, IP address, programming menu pages,

menu options, configuration settings, and parameter values.

Menu Dial: The Menu Dial navigates the Converge Pro LCD programming menu and enables you to select

and modify configuration settings.

ESC Button: The ESC button returns you to the previous screen on the LCD display.

Select Button: The Select button displays the Converge Pro LCD programming menu and selects the

highlighted menu option.

LED Bar Meter: The LED bar meter displays the audio level of a selected input, output, or processing

channel. Default meters: 880-Output 12, 840T-Output 8, TH20-Telco Tx, 8i-Mic 1.

Telco TX RX LEDs: The Telco TX RX LEDs display transmit and receive status of the connected telephone

line (840T and TH20 only).

Telco On/Off Button & LEDs: The Telco On/Off button connects and disconnects the connected telephone

line. The LEDs indicate the connection status (840T and TH20 only).

In addition to making configuration adjustments from the front panel, you can also use execute macros and run

presets. For more information on using Converge Pro front panel controls, see Controls and Connections.