Specifications

22 Chapter 2: Expansion Bus & LCD Programming
Adjusting LCD Menu Parameters
Use the following procedure to adjust LCD Menu parameters for your Converge Pro units(s):
Scroll to the parameter you want to adjust using the Menu Dial.
Press the Select button to select the parameter. The parameter will flash when selected.
Select the value for the parameter using the Menu Dial.
Press the Select button to save the parameter value. To discard the change and return to the previous menu,
press the Esc button.
NOTE: Use the Converge Pro Console software in Configuration Mode for advanced system
configuration.
LCD Menu Tree
Converge 840T
30CONVERGE840T-0
0. 0. 45
CONVERGE MENU
Channels
Settings
PresetsMacros
Channels
Mics
Inputs
Outputs
Process
Faders
Telco Tx
(840T, TH20 only)
Telco Rx
(840T, TH20 only)
Settings
RS-232
Network
DID
Default
Contrast
Macros
Macros I-255
Presets
Presets I-32
As shown above, the main menus on the LCD display are:
Channels
Settings
Macros
Presets
1.
2.
3.
4.
•
•
•
•