Specifications

Technical Services: 800-283-5936 25

Use the Menu Dial to highlight Gain or Mute

Press the Select button

Select the desired value using the Menu Dial

Press the Select button to set the selected value

Press the Esc button to return to the Channels menu

NOTE: When Mute is set to On for a Mic Input Channel, the Microphone-On LED for that channel

illuminates red on the front panel.

For more information, see the Table of Contents for these related topics:

LCD Programming Overview

LCD Channels Menu

LCD Settings Menu

LCD Macros Menu

LCD Presets Menu

Controls and Connections

Mic Input Settings

Line Input Settings

Output Settings

Process Settings

Fader Settings

Telco Tx Settings (840T, TH20 only)

Telco Rx Settings (840T, TH20 only)

LCD SETTINGS MENU

The LCD Settings Menu allows you to configure serial port settings and Device IDs, view network IP settings,

change the LCD contrast level, and restore factory default settings for a Converge Pro unit.

Accessing the Settings Menu

To access the Settings menu, press the Select button on the front panel, use the Menu Dial to select Settings,

and press the Select button.

The Settings menu appears as shown below:

SETTINGS PAGE 1/2

RS232

Network

DefaultDID

Settings menu options include:

RS-232

Network

DID

Default

Contrast

•