Specifications

28 Chapter 2: Expansion Bus & LCD Programming
LCD PRESETS MENU
The LCD Presets Menu allows you to execute Presets from the Converge Pro front panel. To create Presets, use
the Console software in Preset Mode.
Accessing the Presets Menu
To access the menu, press the Select Button on the front panel, use the Menu Dial to select Presets, and press
the Select Button.
The Preset Menu appears as shown below:
PRESET MENU
1-Combine Room
2-UnProgrammed
3-UnProgrammed
4-UnProgrammed
5-UnProgrammed
6-UnProgrammed
7-UnProgrammed
Executing Macros
Use the following procedure to execute Presets from the front panel LCD display:
Use the Menu Dial to highlight the Macro you want to execute
Press the Select button
Answer Yes at the prompt that appears to run the selected Preset, or No to cancel.
Press the Esc button to return to the main LCD menu.
You can also run presets from the Services menu while Console is in Configuration Mode.
For additional information, refer to the Table of Contents for these related topics:
LCD Programming Overview
LCD Settings Menu
LCD Channels Menu
Preset Mode
1.
2.
3.
4.
•
•
•
•