Specifications

38 Chapter 3: Converge® Console Programming
CONNECT TO A SITE
Connect To a Site
Click the Connect button on the Console Button Bar, or select Connect from the Connect Menu. The
Connect dialog appears as shown below.
Connection options include:
To automatically create a new Site File, select the Create New Document and Connect to Site radio button.
To pull data from the unit to the current Site File, select the Pull Data from Unit to Current Document radio
button
To push data from the current Site File to the unit, select the Connect to Site and Push Document radio
button.
To connect via USB, select the USB Connection radio button.
To connect via IP, select the IP Connection radio button, and select a unit from the Available Addresses drop-
down list (or enter an IP address in the Enter Address entry box).
Press the Connect button to connect to the site or Cancel to close the dialog.
Disconnect from a Site
To disconnect from a site, press the Disconnect button on the Console Button Bar, or select Disconnect from
the Connect menu. Answer Yes to the Confirm dialog that appears, or No to cancel.
For additional information, refer to the Table of Contents for these related topics:
Site File Overview
Site Properties
Unit Communication (IP) Settings
•
•
•
•
•
•
•
•