Specifications

40 Chapter 3: Converge® Console Programming
Create A New Site
To create a new site, New Site from the File menu or by clicking the New Site button on the Console Button
Bar. The Site Properties window appears. Site Properties are described in the following sections.
NOTE: You must have Administrator privileges to modify usernames and/or passwords. Also,
usernames and passwords are not case sensitive.
Site Properties are described in the following sections.
Site Properties: General Tab
The General tab of the Site Properties window displays Site file information as shown above. Enter a site name, file
author, and site description in the Site Info section of the tab. Press OK to save the changes, Cancel to close the
Site Properties window, or click on the Management or Time/Local tabs to continue site configuration.
Site Properties: Management Tab
The Management tab (shown below) enables you to configure control master/slave settings, SNMP parameters,
email notification settings, as well as usernames and passwords.
NOTE: You must be disconnected from the Site in order to configure IP properties. To disconnect,
click the Disconnect button on the Console Button Bar. (Connection status is shown
on the Console Status Bar.)
NOTE: You must have Administrator privileges to connect to Console, and to edit usernames
and passwords.