Specifications

50 Chapter 3: Converge® Console Programming
CHANNEL VIEW TAB OVERVIEW
The Channel View section of the interface provides complete configuration of all functionality related to a given
channel, from input to processing to output. The type of channel selected in the Tree View tab of the Current Unit
pane determines the contents of the Channel View pane in the center of the Console.
The channels available in the Tree View tab are:
•Mic Input Channels
•Line Input Channels
•Telco Rx Channel (840T and TH20 only)
•Output Channels
•Telco Tx Channel (840T and TH20 only)
•Processing Channels
•Fader Channels
Accessing Channel View
Selecting a channel displays the Channel View Tab for that channel. For example, the Channel View for a Mic
Input channel is shown below:
Channel Configuration Controls
As shown above, the configuration settings for a channel are displayed as controls (buttons, sliders, check-boxes,
selection lists, text entry boxes) in the Channel View pane. Use the text entry boxes to assign custom names. Use
the drop-down lists to select from a list of configuration values. Use the sliders to set a discreet value for channel
configuration parameters.