Specifications

52 Chapter 3: Converge® Console Programming
Gating
The channel routing matrix of the Channel View pane shows the associated Matrix row and routing configuration
for the channel selected in the Tree View tab of the Current Unit pane. The channel routing matrix of the Channel
View pane for a Mic Input channel is shown below.
Use the gating legend to determine the current gating configuration of the selected input channel. As shown in the
example above, Input 1 is non-gated and cross-pointed by default to Output 1. It is also gated and cross-pointed
by default to Outputs 5-7, Telco TX, and Exp Bus O.
Clicking a cross point box selects it, clicking it a second time sets the cross point, as indicated by a green box. The
dB level for set cross points is shown numerically in the box. To adjust cross-point gain/attenuation, right-click on a
cross point box and select Cross Point from the pop-up menu as shown below.
The Cross Point Attenuation slider appears as shown below. Move the slider or use the selector box to set the
gain/attenuation level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
NOTE: Changes are automatically saved when you close the slider.
In the channel route matrix section of the Channel View pane, pressing the channel button underneath an Output,
Process, or Fader cross-point box (shown above) displays the signal flow diagram and configuration controls for
that output channel (shown below).