Specifications

74 Chapter 3: Converge® Console Programming
Channel Routing Matrix: Inputs
The channel routing matrix section of the Channel View screen shows the associated matrix row and audio routing
configuration for the selected input channel (mic input 1 in this case). Clicking a cross point box selects it, clicking
it a second time sets the cross point, as indicated by a green box. The dB level for set cross points is shown
numerically in the box.
To adjust cross-point gain/attenuation, right-click on a cross point box and select Cross Point from the pop-up
menu.
The Cross Point Attenuation slider appears. Move the slider or use the selector box to set the gain/attenuation
level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
NOTE: Your changes are automatically saved when you close the slider.
Channel Routing Matrix: Outputs, Processing, Faders
In the channel routing matrix, pressing the button underneath an Output, Process, or Fader cross-point box
displays the signal flow diagram and configuration controls for that channel as shown below. For example, clicking
on Output 5 displays the routing configuration for output channel 5 as shown next page.