Specifications

82 Chapter 3: Converge® Console Programming
TELCO RX SETTINGS (840T AND TH20)
Telco Rx Settings enable you to customize telephone receive channel settings using the Channel View screen.
Accessing Telco Rx Settings
With the Channel View tab selected on the Tab Bar, select the Telco Rx channel on the Tree View tab in the Site
Pane.
As shown above, the Center Pane displays a signal flow diagram for the telco rx channel, real-time peak-
level meters, as well as the channel routing matrix that shows the audio routing configuration for the channel.
Configuration settings for the telco rx channel are displayed as controls (buttons, sliders, check-boxes, selection
lists) which are located at the appropriate stage in the signal flow.
The following sections describe how to use these controls (in order from left-to-right and top-to-bottom as they
appear in the signal flow) to configure the telco receive channel settings for your installation.
Channel Label
Rename the channel by entering a name in the Label entry field (optional).