Specifications

Technical Services: 800-283-5936 87
To use noise cancellation, click Enable Noise Canceller, then adjust the Cancellation Depth to the setting which
provides the best combination of low noise and maximum speech clarity for your installation. The attenuation depth
can be set in 1dB increments from 6dB to 15dB. The default is 6dB. The noise canceller default is Off.
Clear Effect Button
To reduce bandwidth requirements, telephone lines limit audio bandwidth to a range of 300Hz-33kHz. ClearEffect
enhances the incoming signal from a telephone line to emulate wideband audio by adding high and low frequencies
to the audio signal. All output signals routed from an input channel with ClearEffect enabled are routed as wideband
audio. Click the ClearEffect button to toggle this feature on and off. The default is On.
ALC Button
Clicking the Automatic Level Control button toggles ALC on and off. ALC provides auto-leveling for all conference
call participants on the telco rx line, keeping soft and loud participants at a consistent level. The default is Off. See
AGC/ALC for additional information.
Mute Button
Clicking the Mute button toggles muting for the telco receive channel. The default is off.