Specifications

92 Chapter 3: Converge® Console Programming
Mute Button
Clicking the Mute button toggles muting. The default is off.
Gain Slider
The Gain slider adjusts output gain level. Use the Gain slider to adjust output volume level. You can also enter the
level directly in the 0.0dB box. If you select any level below -60dB, the signal will be muted. To change the value, use
the slider or selector box. Range is from -65 to +20dB in .5dB increments. The default is 0dB.
Min/Max Limits
Use the yellow and green upper and lower limit arrows on the Gain Scale in the Gain section of the screen to set
minimum and maximum gain level limits. These limits only apply when using relative gain commands; absolute gain
commands can exceed the min and max limits. Min/Max limits apply to all serially connected control devices and
prevent users from adjusting levels beyond the min/max levels.
Output Level Meter
Shows the signal level in dB when a signal is present. Range is from -30 to +20dB.
Channel Routing Matrix
The channel routing matrix on the Channel View screen shows the associated matrix row and audio routing
configuration for the selected channel (Output 1 in this case). Clicking a cross point box selects it, clicking it
a second time sets the cross point, as indicated by a green box. The dB level for set cross points is shown
numerically in the box.