Specifications

Technical Services: 800-283-5936 93
You can click directly on any cross point box in the top row to set a parameter as cross point, or leave it blank, as
required for your installation.
To adjust cross-point gain/attenuation, right-click on a cross point box and select Cross Point from the pop-up
menu.
The Cross Point Attenuation slider appears. Move the slider or use the selector box to set the gain/attenuation
level in dB. The range is from -60 to 12dB in .5dB increments. The default is 0dB.
NOTE: Your changes are automatically saved when you close the slider.
In the channel routing matrix, pressing the button above an Input, Process, or Fader cross-point box displays the
signal flow diagram and configuration controls for that channel.
This display is identical to that shown in Channel View when the channel is selected in the Tree View pane. See Mic
Input Settings, Line Input Settings, Processing Settings, and Fader Settings for more information.