User Manual
Dante Controller User Guide
Copyright © 2014 Audinate Pty Ltd. All rights reserved.
-12-
n Dante Controller for Mac now supports OSX10.8.
v3.2.8
n Switch Configuration - supported devices allow specialist switching configurations
n Device View > Status tab - for supported devices, the 'Device Information' pane in the Device View
> Status tab now displays manufacturer, product type and product version information for the device.
Dante-specific information for the device (Dante model, Dante software and Dante firmware ver-
sions) is now displayed in the 'Dante Information' pane.
n Device Status View - the 'Type' and 'Version' columns have been renamed as 'Product Type' and
'Product Version'
n Various performance and stability enhancements
Minimum System Requirements
The tables below list the minimum system specifications for your computer to be able to use Dante
Controller.
Disclaimer: It is possible that your computer may meet the requirements below, but suffer from some
other individual performance limitation related to its particular hardware. Please seek the advice of your
computer support administrator.
General
Component Recommended Minimum Requirement
Processor 1GHz or better
Memory 512Mbyte of RAM
Network Standard wired Ethernet network interface (100Mbps or Gigabit). Wireless LAN (Wi-
Fi) Ethernet interfaces are not supported
Windows
Component Recommended Minimum Requirement
Operating
System
n Windows 7 (SP1 and above), 8 and 8.1
NOTE: Both UTF-8 and Unicode are supported EXCEPT for host or device
names; the DNS standard does not support Unicode for these
Mac OSX
Component Recommended Minimum Requirement
Operating System Mac OS X 10.7.5, 10.8.5 and 10.9
NOTE: Intel architecture only; PPC architecture is not supported