User's Manual

CONFIGURING THE DECODER

The VIEW Pro D310 Decoder is configured for use in the network with the

VIEW CONSOLE program. VIEW CONSOLE is a PC-based program that

allows you to configure devices so that they can communicate across a

StreamNet network. Phases of the software setup include:

• Create a new or open an existing project

• Add the D310 device to the project

• Match the correct device from the right-hand column.

• Configuring the device with system-specific information regarding

Display Outputs, Controls, IP.

• Saving the project

• Sending the configurations

These steps in these processes are detailed in the VIEW CONSOLE user

manual available for viewing or download at www.ClearOne.com.

NOTE: VIEW CONSOLE version 3.02.xx or later is required to

support the D310 decoder.

Information specific to the VIEW Pro Decoder is contained in the VIEW

Pro - D310 Digital AV Decoder Installation and Users Manual available

for viewing or download at www.clearone.com. (The steps for using the

VIEW CONSOLE program and options for the D310 are similar to those

of the D210 decoder).

VIEW PRO D310 QUICK-START GUIDE