User's Manual

NETWORK CONNECTION
Network Connection allows you to connect to any INTERACT system on your network using an IP
address or a unique network name.
Using Network Find
Open the Network Find
l Click the Network Find button on the toolbar (or located under Tools/Network Find).
Note: INTERACT Software will automatically detect units located on the same
subnetwork. You only need to use Network Find to locate units outside of the
subnetwork. This is based on the assumption that your LAN is configured correctly.
If your LANis not configured correctly, please refer to your IT Administrator.
Connect to a System on the Network
1. Enter theIP Address or Network Name of the system to which you want to connect.
2. Click OK.
3. You will see a Password Prompt window. Enter the User Name and Password of the net-
worked system.
4. Click OK. The system icon will appear in the Connection list and the Configuration screen will
open.
PHONEBOOK
INTERACT Software features a Phonebook utility which stores up to 20 phone numbers. These
numbers are also assigned a speed dial number for dialing convenience through the INTERACT
Controller. Phonebook entries are listed in alphabetical order, speed dial number or number. You
can add, edit or delete an entry from the Phonebook window.
Phonebook Edit
Open the Phonebook
l
Click the Phonebook button
on the toolbar (or located under Tools/Phonebook Edit).
Add a number
1. Click Add
2. Enter the Name and Number.
3. Enter a Speed Dial Number(1-20). If you don't enter a speed dial number, INTERACT Soft-
ware will automatically assign one. Alternatively, the user can assign a speed dial number of
None - this will not assign a speed dial number.
4. Click OK
Delete a number
1. Select the entry you want to delete.
2. Click Delete
Edit a Phonebook entry
1. Select the entry you want to edit, click Edit.
2. Make desired changes to the entry.
3. Click OK. Confirm the deletion.
- 14 -