User's Manual
Table Of Contents
- _gen_
- Important Safety Information
- INTERACT Software Overview
- INTERACT MIC EX
- INTERACT Dialers
- INTERACT Com / COM-W (Wireless)
- Network Connection
- Phonebook
- Regional Settings
- Event Log
- System Checks
- Firmware Loader
- INTERACT COM Updater
- Serial Commands
- INTERACT AT
- Basic Connections
- Device Toolbox - INTERACT AT
- Mixer Console - INTERACT AT
- Line Input Settings - INTERACT AT
- Line Output Settings -- Interact AT
- Camera Control
- Dialer - INTERACT AT
- Communications Settings - INTERACT AT
- Record Output Settings -- INTERACT AT
- INTERACT Mic and Mic EX Settings - INTERACT AT Only
- Playback Input Settings - INTERACT AT
- Telephone Settings - INTERACT AT
- Loudspeaker Settings - INTERACT AT
- INTERACT COM Settings - INTERACT AT
- INTERACT PRO
- INTERACT PRO 8i
- Device Toolbox - INTERACT PRO
- Mic Settings - INTERACT PRO
- Mixer Console - INTERACT PRO
- Line Input Settings - INTERACT PRO
- Presets - INTERACT PRO
- Dialer - INTERACT PRO
- Communications Settings - INTERACT PRO
- COM Settings - INTERACT PRO
- Telcos - INTERACT PRO
- Processing Settings - INTERACT PRO
- Output Settings - INTERACT PRO
- Compliance
- Bookmarks
REGIONAL SETTINGS
You can set the date and time in the Regional Settings window to ensure accurate time stamp on
log files. The Regional Settings window is accessed through the Regional Setting toolbar button
or from the Tools menu (Tools/Regional Settings).
Date / Time
To set Local Time
1. Select the Local Time check box. The Local Time and Date boxes are now active.
2. Enter the current date and time.
3. Select Use Daylight Savings if your region observes daylight saving time.
4. Select the correct Time Zone.
5. Click OK to save settings and close the window.
To reference a Time Server
1. Uncheck the Use Local Time check box.
2. Enter the IP address for the time server.
3. Select Use Daylight Savings if your region observes daylight saving time.
4. Select the correct Time Zone.
5. Click OK to save settings and close the window.
If the device is connected to a network using DHCP, Time Server is included with DHCPoptions
and will auto populate depending on those settings.
- 15 -