User's Manual
Table Of Contents
- _gen_
- Important Safety Information
- INTERACT Software Overview
- INTERACT MIC EX
- INTERACT Dialers
- INTERACT Com / COM-W (Wireless)
- Network Connection
- Phonebook
- Regional Settings
- Event Log
- System Checks
- Firmware Loader
- INTERACT COM Updater
- Serial Commands
- INTERACT AT
- Basic Connections
- Device Toolbox - INTERACT AT
- Mixer Console - INTERACT AT
- Line Input Settings - INTERACT AT
- Line Output Settings -- Interact AT
- Camera Control
- Dialer - INTERACT AT
- Communications Settings - INTERACT AT
- Record Output Settings -- INTERACT AT
- INTERACT Mic and Mic EX Settings - INTERACT AT Only
- Playback Input Settings - INTERACT AT
- Telephone Settings - INTERACT AT
- Loudspeaker Settings - INTERACT AT
- INTERACT COM Settings - INTERACT AT
- INTERACT PRO
- INTERACT PRO 8i
- Device Toolbox - INTERACT PRO
- Mic Settings - INTERACT PRO
- Mixer Console - INTERACT PRO
- Line Input Settings - INTERACT PRO
- Presets - INTERACT PRO
- Dialer - INTERACT PRO
- Communications Settings - INTERACT PRO
- COM Settings - INTERACT PRO
- Telcos - INTERACT PRO
- Processing Settings - INTERACT PRO
- Output Settings - INTERACT PRO
- Compliance
- Bookmarks
INTERACT COM SETTINGS - INTERACTAT
Click the Headset/USB/RF drop down to add a headset to the INTERACT mixer console. Once
selected, click the headset icon to launch the Headset USB Settings window.
Telephone Mode
Set/Line Jack Active and Headset/INTERACT COM Active
Check to adjust settings for this telephone mode.
Levels
l Telco/Headset Rx: Adjusts the Telco/Headset receive levels
l Telco/Headset Tx: Adjusts the Telco/Headset transmit levels
l
USB Rx: Adjusts the USB receive levels
l USB Tx: Adjusts the USB transmit levels
l Mute: Click the Mute button to mute any of the above settings.
INTERACTCOM Active
Check to adjust the headset configuration.
Headset Configuration
l Telephone Set: Click the drop down to select the telephone set you will use with the head-
phone/USB Breakout Box configuration.
l RJ 11 Pin Out: Choose the drop down setting which best describes your pin out con-
figuration.
l Speaker Gain: Adjusts headset speaker gain
l Mic Gain: Adjusts headset mic gain
l Telephone Line Echo Cancellation: (Default On) Activates/deactivates Telephone Line Echo
Cancellation
l Non-Linear Processing: (Default On) Activates/deactivates Non-Linear Processing
l Automatic Level Control: (Default On) Activates/deactivates Automatic Level Control
USB Configuration
l Standard USB Mode/Office Communicator Mode: Chooses between either Standard USB
Mode or Office Communicator Mode (used only with Microsoft Office Communicator).
- 39 -