User's Manual
Table Of Contents
- _gen_
- Important Safety Information
- INTERACT Software Overview
- INTERACT MIC EX
- INTERACT Dialers
- INTERACT Com / COM-W (Wireless)
- Network Connection
- Phonebook
- Regional Settings
- Event Log
- System Checks
- Firmware Loader
- INTERACT COM Updater
- Serial Commands
- INTERACT AT
- Basic Connections
- Device Toolbox - INTERACT AT
- Mixer Console - INTERACT AT
- Line Input Settings - INTERACT AT
- Line Output Settings -- Interact AT
- Camera Control
- Dialer - INTERACT AT
- Communications Settings - INTERACT AT
- Record Output Settings -- INTERACT AT
- INTERACT Mic and Mic EX Settings - INTERACT AT Only
- Playback Input Settings - INTERACT AT
- Telephone Settings - INTERACT AT
- Loudspeaker Settings - INTERACT AT
- INTERACT COM Settings - INTERACT AT
- INTERACT PRO
- INTERACT PRO 8i
- Device Toolbox - INTERACT PRO
- Mic Settings - INTERACT PRO
- Mixer Console - INTERACT PRO
- Line Input Settings - INTERACT PRO
- Presets - INTERACT PRO
- Dialer - INTERACT PRO
- Communications Settings - INTERACT PRO
- COM Settings - INTERACT PRO
- Telcos - INTERACT PRO
- Processing Settings - INTERACT PRO
- Output Settings - INTERACT PRO
- Compliance
- Bookmarks
INTERACT PRO
The INTERACT PRO is a mixer with 8 mic inputs, 8 line outputs, 2 line inputs, processing
channels, 4 presets and a built-in Telephone hybrid.
Features of the INTERACT PRO include:
Front
A. On/Off hook indicator
B. Microphone Indicator: Indicators show which microphone channels are active
C. Output Metering: Shows current meter level of output chosen as volume channel in the Dialer
Window
D. USB 1.1 compatible input
Back
A. Telephone Interface: Used to connect an analog phone line to the INTERACT
B. RS-232 Control Port: Used to connect to the Interact Software or control from a 3rd part con-
troller such as AMX or Crestron
C. Link In: Link input used to connect other INTERACT PRO peripheral devices ONLY
D. Mic/Line Inputs: Mini-terminal push-on block connector for any combination of microphone
and/or line level inputs
E. Line In: Mini-terminal push-on block connector for line level inputs only
F. Line Out: Mini-terminal push-on connector for line-level outputs
G. Power Adapter Input: 12 VDC 2.5 amp
- 40 -