User's Manual
Table Of Contents
- _gen_
- Important Safety Information
- INTERACT Software Overview
- INTERACT MIC EX
- INTERACT Dialers
- INTERACT Com / COM-W (Wireless)
- Network Connection
- Phonebook
- Regional Settings
- Event Log
- System Checks
- Firmware Loader
- INTERACT COM Updater
- Serial Commands
- INTERACT AT
- Basic Connections
- Device Toolbox - INTERACT AT
- Mixer Console - INTERACT AT
- Line Input Settings - INTERACT AT
- Line Output Settings -- Interact AT
- Camera Control
- Dialer - INTERACT AT
- Communications Settings - INTERACT AT
- Record Output Settings -- INTERACT AT
- INTERACT Mic and Mic EX Settings - INTERACT AT Only
- Playback Input Settings - INTERACT AT
- Telephone Settings - INTERACT AT
- Loudspeaker Settings - INTERACT AT
- INTERACT COM Settings - INTERACT AT
- INTERACT PRO
- INTERACT PRO 8i
- Device Toolbox - INTERACT PRO
- Mic Settings - INTERACT PRO
- Mixer Console - INTERACT PRO
- Line Input Settings - INTERACT PRO
- Presets - INTERACT PRO
- Dialer - INTERACT PRO
- Communications Settings - INTERACT PRO
- COM Settings - INTERACT PRO
- Telcos - INTERACT PRO
- Processing Settings - INTERACT PRO
- Output Settings - INTERACT PRO
- Compliance
- Bookmarks
INTERACT PRO 8i
The INTERACT PRO 8i is an 8-microphone channel expansion unit, using an RJ-45 cable to
connect with the INTERACT PRO mixer.
Features of the INTERACT 8i include:
Front
A. On/Off hook indicator
B. Microphone Indicator: Indicators show which microphone channels are active
C. Output Metering: Shows current meter level of output chosen as volume channel in the Dialer
Window
Back
A. RS-232 Control Port: Only used for firmware recovery. Cannot be used with a third party con-
trol system such as AMX, Crestron or an INTERACT Dialer
B. Link Out: Link output to connect ONLY to other INTERACT PRO peripheral devices
C. Link In: Link input to connect ONLY to other INTERACT PRO peripheral devices
D. Mic/Line Inputs: Mini-terminal push-on block connector for any combination of microphone
and/or line level inputs
E. Power Adapter Input: 12 V D/C, 2.5 Amp
- 42 -