User's Manual

DEVICE TOOLBOX - INTERACT PRO
The audio settings for many common auxiliary audio devices such as video codecs, video
playback devices, amplifiers and sound cards, have been pre-configured for optimal performance
with the INTERACT PRO system. These devices are listed in the Device Toolbox section.
Note: If your device is not listed, you can configure it manually or add it to the Device
Toolbox using the Device Toolbox Editor.
Adding a Device
Adding Devices to the Device Toolbox
1. Click the plus sign (+) to expand a category.
2. Right-click the category name and select Device Toolbox Editor.
3. Click the Add button.
4. From the Device Type dropdown, choose the category of device you're adding. Enter a Man-
ufacturer name into the Manufacturer field and a Model name/number into the Model field.
5. If the device uses a Stereo connection, click the Stereo radio button. This setting enables
input/output assignment for the stereo channels.
6. EQ sliders for the Low, Mid and High frequency ranges. Adjust the EQ sliders to set a
desired sound quality level for each device.
7. Use the Output Gain slider to adjust the default output level for your device.
8. Click OK to save, Cancel to abandon the changes.
Editing Devices
1. Click the plus sign to expand the category with the device you want to edit.
2. Right-click the device to edit, click Edit.
3. Follow steps 4-7 from Adding Devices to the Device Toolbox to complete the edit proc-
ess.
4. Click OK to save, Cancel to abandon the changes.
Deleting Devices
1. From the Device Toolbox click the listed device you wish to delete.
2. Click the Delete button, when the Confirm dialog box appears, click Yes to complete the
device removal.
Using Pre-Configured Devices
Users can click on a device from the Toolbox and drag it into the Flow Window, where it's added
to the channel they wish to configure (for example: a microphone is dragged into the Flow and
dropped onto Mic Input 3). Once the device is added an icon appears next to that Channel
Number. Click any Mic Input to launch the dialog window (in this case, the Mic Input dialog). This
example shows the microphone we added Connected To Mic Input 3. Repeat this process for any
device on any of the Channels you wish you configure with a pre configured device.
If an INTERACT8i is connected to the PRO unit, click the Enable check box in the 8i Mics Flow to
add Mic Inputs 9-16. Microphones and PTT Microphones can now be dragged from the Device
Toolbox onto these available inputs.
Right-click a device in the Flow Window (e.g. the microphone we dropped onto Mic Input 3) and
click Clear Device to remove it from that Channel.
- 43 -