User's Manual

DIALER - INTERACT PRO
In addition to the INTERACT Controller, you can manage calls through the Dialer in INTERACT
Software. You can dial a number, redial the last dialed call, and disconnect calls. You can also use
flash settings, mute the microphones, adjust call volume and change between Telco and OCS
modes.
Making and Receiving Calls
Open the Dialer
Note: A connection must be present for the dialer to work on the AT. A connection is
not necessary for the INTERACT PRO.
l Click the Dialer icon on the flow window.
Make a call
1. While connected to an active phone line, click the ON/OFF key. You will hear a dial tone.
2. Dial the number as you would on a standard phone. The number appears on the LCD screen
as it dials.
Note: You can also pre-dial the number and then press the ON/OFF key to connect
the call. Press and hold the pound key (#) to enter a pause in the dialing string.
Call a Phonebook number
1. Select the number in the Phonebook list. The name and number appear in the display win-
dow.
2. Click On/Off button to dial the call.
Tip: You can also double-click the number in the Phonebook list to initiate a call.
End a call
l Click the On/Off button.
Redial a number
l Click the Redial button.
Send a Flash signal
l If your telephone service includes call transfer, call waiting or conference calling, you can
use the Flash key. Refer to your local telephone service provider for details.
- 52 -