Instruction Manual

DigiLinX Installation and Design Guide
5-10
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
 BURR-BROWN 24-bit/96KHz Analog-to-Digital converters
 Power management sensor for Video, LED, or Level sensing of video sources for
audio playback
 Balanced Audio Input - Phoenix Connectors
 Integrated IR receiver
 IR/RS-232 (two way) control of sources (cable included)
 Includes three contact closures - two function as output contact closures and one
functions as a circuit closure detector
 NTSC and PAL capable
 LEDs for Signal detection, Power detection, and Activity status
 Power State Sense Input
 Dimensions: 9 1/2” high x 1 3/4” high x 8 2/3” deep (24mm x 45mm x 240mm)
 Weight: 4 lbs (2.722 Kg)
 NetPower: 4
 ROHS compliant
Connectors
Video Input/Output Connectors Video Connectors are BNC
Composite Input and pass-through (480i, 576i)
S-video Input and pass-through (480i, 576i)
Component Input and pass-through (480i, 480p,
720p, 1080i)
RGBHV Input (up to 1024 x 768 @ 60Hz)
Audio Input Connectors One pair of analog RCA jacks (Gold Plated)
One Coaxial Digital (S/PDIF) (Gold Plated)
3-Position Phoenix Connectors - Balanced Audio
Audio Output Connectors One pair of analog RCA jacks (Gold Plated)
One Coaxial Digital (S/PDIF) (Gold Plated)
Gigabit Ethernet Connection RJ45
2-position Phoenix Connector - power20 - 32VDC
IR Emitter output/RS232 One 3.5mm
IR Receiver input One included
3 Contact Closures One input, Two output
Installation
The MediaLinX A/V is a half-rack width, 1U high device. Use a RS1U rack shelf to fit
two MediaLinX A/Vs per shelf. To fit only one MediaLinX A/V, use the blank plate