Instruction Manual

DigiLinX Installation and Design Guide
11-2
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStream
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
NOTE: The faceplate, electronics package and mounting bracket are each sold separately.
The DoorLinX faceplate covers the built-in speaker and microphone. When a guest
presses the matching doorbell, the DigiLinX system plays an MP3 file in all designated
rooms through the sound system. The system temporarily mutes anything currently
playing. A message appears on the designated TouchLinX giving the user the option of
establishing an intercom session. After the user activates these controls, the other
TouchLinX return to their previous screens.
The intercom session allows the user to communicate with the guest and also provides
other additional features. If a door latch is installed, it can be triggered by a built-in
contact closure that can be activated by a button on the TouchLinX. In addition, a
third-party camera can be integrated with the DoorLinX and the image from that
camera shown on the TouchLinX.
Specifications
The DoorLinX components have the following specifications:
 omnidirectional microphone
 contact closure relay: 1A @ 30VDC
 dimensions:
 doorbell: 25mm wide, 75mm high, 6mm deep
 faceplate: 130mm wide, 110mm high, 10mm deep
 speaker: 8 Ohms, maximum power 5 Watts.
 NetPower: 1