BluePort NS-BP200 - Wireless Audio Gateway Installation Guide
Telephone 1.800.283.5936 1.801.974.3760 FAX 1.801.974.3669 E-mail On the Web tech.support@clearone.com www.clearone.com BluePort Wireless Audio Gateway Installation Guide ClearOne Document 800-225-014-01 - Oct. 03, 2011 (Rev. 1.0) © 2011 ClearOne All rights reserved. No part of this document may be reproduced in any form or by any means without written permission from ClearOne. ClearOne reserves specific privileges. Information in this document is subject to change without notice. U.
Table of Contents Product Overview Application.............................................................................................................................................................................1 Supported Devices................................................................................................................................................................1 Connections and Controls Electrical Connections................................................................
Product Overview The NS-BP200 BluePort is a simple to use digital wireless audio gateway that enables you to transmit digital audio from a source with Bluetooth® A2DP support to your DigiLinX, NaimNet, VIEW™, Musica™ or Quartet™ multi-room system with a compatible EIM connection. The BluePort is fully Bluetooth v2.0 compliant. Application The BluePort acts as a receiver to connect the output from your Bluetooth wireless audio device to your connected audio system.
Connections and Controls Electrical Connections 1x RJ45 connection with EIM (Expansion Interface Module used with SpeakerLinX, Musica Keypad, NaimNet and Quartet Keypad. Optional power injector may be required). 1x RJ45 connection with AP (Audio Port connection used with SpeakerLinX, TLA250, or Musica and Quartet Keypad).
Powering the BluePort The BluePort is powered either directly from the system connected to the BluePort using the EIM Input, or by an optional Power Injector. The following table specifies the systems that can connect to the BluePort and whether or not a Power Injector is required to power the unit.
Connection Diagrams The following pages contain diagrams showing the connection layouts of various supported devices with the BluePort.
5 Technical Support: 800.283.
Installation Guide 6
Pairing the Wireless Device Zone Name Selector Switch Multiple BluePort NS-BP200 devices may be installed within wireless range of each other. In this case multiple “BluePort” names are listed on their wireless device when pairing. The Zone Name Selector rotating switch allows the installer to set one of sixteen (16) preset names for the BluePort. The switch needs to be set before using the BluePort.
Reconnecting to a Previously Paired BluePort The BluePort will store the previous sixteen (16) devices that have connected. Previously paired devices do not need to repeat pairing. Instead open the Bluetooth configuration page on your wireless source and reconnect to the room set with the Zone Name Selector rotary switch (SET ID). If a stream is playing from one device and second device connects and starts a stream, the second device’s stream will be played.
Compliance and Service Compliance Overview RoHS Compliance All components and processes used to produce the BluePort comply with the RoHS initiative. Electrical Safety Advisory Any modifications to the device without express authorization from ClearOne is prohibited as per 47CFR15.21 and could void the users authority to operate the device. FCC Part 15: This device complies with FCC Part 15 regulations for a Class B device.