User Manual

Editing Devices
5-69
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
upgrading devices, you have access to this information in the project file. Table 5-45 provides information on
the fields on the Info tab.
2. After adjusting information on the Info page, select Apply.
Table 5-45
SpeakerLinX Info Tab
Tab Selection Description
Info Current IP Address Shows the current IP address of the SpeakerLinX.
Current Subnet Mask Shows the current subnet mask of the SpeakerLinX.
Device Type The type of digital device that this is.
Model Number The NetStreams SpeakerLinX model number.
Firmware Version The firmware version currently running on the SpeakerLinX.
Device Name Descriptive name the installer assigned to the device when
creating the project.
Override Changes the default device name. Keep unchecked in most
instances.
Serial Number The serial number of the SpeakerLinX device.
Device Comments Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary
Room Name The dealer-created name for the room this SpeakerLinX is
assigned to. This name appears on all user interfaces.
Local Source Name The name of the audio source connected to the audio input
jacks on the Audio Port.
Stream Name The dealer created stream name assigned to be managed
by this SpeakerLinX.
KeyLinX Name The dealer created name for the KeyLinX this SpeakerLinX
is assigned to (if a KeyLinX is connected to the SpeakerLinX
in this room).
Show Advanced Options Normally used for advanced configurations. Typically, the
installer will not use this screen.