User Manual

DigiLinX Dealer Setup Version 2.35.00
6-2
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Finishing the Project
1. Select Finish from the Dealer Setup Wizard.
The setup is complete.
2. Select File>Save to save the project.
3. Close the Dealer Setup program.
Sending the Configuration Without the Wizard
If you are not in the Dealer Setup Wizard, complete the following steps:
1. With the project open to the changes you just made, select one of the Send
Configuration icons (see Table 6-1).
2. Select File>Save to save the project.
Table 6-1
Send Configuration Icons
Send Configuration to Device
Send Configuration to Multiple
Devices