User Manual

KeyLinX
12-3
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
 EIM dongle (includes one CAT5 cable)
 tools for making cable (including cable tester).
Installing a KeyLinX with an Audio Port
The following procedures show you how to install a KeyLinX with an audio port
configuration.
1. Connect the KeyLinX to the KeyLinX-labeled connector on the splitter.
2. Connect the Audio Port and/or MU290 to the audio connector on the EIM splitter.
(see Figure 12-3).
Figure 12-3 KeyLinX Installation Drawing
Installing an IRLinX in a KeyLinX Configuration
The EIM splitter is required in all KeyLinX installations. This provides a port for the
KeyLinX (KL101 or KL201) and for the Audio Port. Figure 12-3 shows a KeyLinX