User Manual

DigiLinX Dealer Setup Version 2.35.00
5-20
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax [phone] / Toll Free Technical Support [phone]
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Figure 5-18 MediaLinX MLA101 Info tab
The Info tab contains all of the information about that particular MediaLinX MLA101. Table 5-11 provides
information on the fields on the Info tab.
Table 5-11
MediaLinX MLA101 Info Tab
Tab Selection Description
Info Current IP Address The current IP address of the MediaLinX.
Current Subnet Mask The current subnet mask of the MediaLinX.
Device Type The type of DigiLinX device that this is.
Model Number The NetStreams MediaLinX model number.
Firmware Version What firmware version is currently running on the MediaLinX.
Device Name Descriptive name the installer assigned to the device when
creating the project.
Override Changes the default device name. Keep unchecked in most
instances.
Serial Number Displays the MediaLinX serial number.
Device Comments Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary
Source Name The Descriptive name entered by the installer when the
device was added.
Stream Name Name of the stream that the MediaLinX is managing.
Show Advanced Options Normally used for advanced configurations. Typically, the
installer will not use this screen.