Operation Manual

286
Group Group 1 5, 23 (P, J)
Value Unsigned Short 2 0 = None
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
(Null to query in text)
XCOMPRESS – Compressor Adjust
This command controls/reports the signal compression setting on a Channel. This command can be used to
replace the COMPRESS command for the P group.
Command Form: DEVICE XCOMPRESS <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 23 (J, P)
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
XCOMPSEL – Compressor Enable
This command enables signal compression on a Channel. This command can be used to replace the COMPSEL
command for the P group.
Command Form: DEVICE XCOMPSEL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 23 (J, P)
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
XDELAY – Audio Delay
This command controls/reports signal delay on a Channel. This command can be used to replace the DELAY
command for the P group.
Command Form: DEVICE XDELAY <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 5, 23 (P, J)
Value Unsigned Short 2 0.0 – 250.00
(Null to query in text)
ms
XDELAYSEL – Audio Delay Enable
This command enables signal delay on a Channel. This command can be used to replace the DELAYSEL
command for the P group.
Command Form: DEVICE XDELAYSEL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 5, 23 (P, J)