Operation Manual

249
Value IP Address 4 (Null to query in text)
ENETSUBN – Ethernet Subnet Mask
This command selects/reports the Subnet mask of the Ethernet port on the unit.
Command Form: DEVICE ENETSUBN [Value]
Argument Type Size Values Units
Value IP Address 4 (Null to query in text)
ENETVLAN – Enable VLAN Tagging
This command enables/disables VLAN tagging. Valid on VH20 ONLY. Change requires reboot to become
effective.
Command Form: DEVICE ENETVLAN [Value]
Argument Type Size Values Units
Value Unsigned
Integer
4 0 = VLAN Tagging Off
1 = VLAN Tagging On
2 = Toggle
(Null to query in text)
ENETVLANID – VLAN ID
This command set/reports VLAN Tag ID for all Ethernet packets (including SIP). Valid on VH20 ONLY. Change
requires reboot to become effective.
Command Form: DEVICE ENETVLANID [Value]
Argument Type Size Values Units
Value Unsigned
Integer
4 1 – 4094
(Null to query in text)
ENETVLANPRI – VLAN Priority
This command sets/reports the VLAN Tagging Priority for all IP packets. Valid on VH20 ONLY. Change requires
reboot to become effective.
Command Form: DEVICE ENETVLANPRI [Value]
Argument Type Size Values Units
Value Unsigned
Integer
4 0 – 7
(Null to query in text)
EREF – Expansion Bus Reference
This command selects an output or reports which output is the expansion bus reference.
Command Form: DEVICE EREF <Channel> [Value Channel Value Group]
Argument Type Size Values Units
Channel Channel 1 See Reference Channels in Groups and Channels
Group Group 1 8 (A, E)